DZR brass ingots Ms63 EZB

DZR Brass ingost in continuous casting: 1.Cu 62.0~63.0 2.DIN EN 1982:2008 3.High polishing, fine grainDD DZR Brass ingots Ms63EZB (Gkms63).Dezincification-resistant brass, DIN EN 1982:2008, CB752s.Continuous casting brass ingot with high quality, no impurities, less oxide end of production.Composition as below:

%	Cu	Pb	Fe	Ni	Mn	Al	Sn	Zn	Si	As	Cr
min	62.0	1.50	0.03	<	<	0.30	<		<	0.1	<
max	63.0	2.40	0.20	0.20	0.02	0.50	0.20	rest	0.02	0.12	0.02

Ms 63EZB special alloy for brass casting parts, e.g.fittings,constructions parts,sanitary appliances with different wall thickness and high demands on the surface processing. This alloy is preferably used in low pressure die casting, but gravity casting is also suitable. Additionally construction material with corrosion and dezincification resistance in chlorinated water.our portfolio is strongly focused on our customer's individual wishesMore detail:

Mateiral	Designation according to EN1982:2008	Casting process and designation	Tensile strength  N/mm2	Proof strength Rp0.2 N/mm2	Elongation A5	Brinell Hardness HBW
brass	CB752S	Permanent Mould-GM Pressure die casting-GP	280N/mm2	120N/mm2	8%	70HBW

DZR brass ingots Ms63 EZB